C10R

General Characteristics for 8Ω

Nominal Overall Diameter
259 mm
10 in
Nominal Voice Coil Diameter
25 mm
1 in
Magnet Weight
270 g
10 oz
Overall Weight
1.2 kg
2.65 lbs
Flux Density
1 T
Voice Coil Winding Depth
8 mm
0.31 in
Magnetic Gap Depth
6 mm
0.24 in

Thiele-Small Parameters for 8Ω

Voice Coil DC Resistance
RE
6.7 Ω
Resonance Frequency
ƒS
96.6 Hz
Mechanical Q Factor
QMS
9
Electrical Q Factor
QES
1.66
Total Q Factor
QTS
1.47
Mechanical Moving Mass
MMS
17.6 g
Mechanical Compliance
CMS
154 µm/N
Force Factor
BxL
6.42 Wb/m
Equivalent Acoustic Volume
VAS
23.8 lt.
Maximum Linear Displacement
XMAX
± 0.8 mm
Reference Efficiency
nO
1.5 %
Diaphragm Area
SD
330.1 cm2
Losses Electrical Resistance
RES
42 Ω
Voice Coil Inductance @ 1kHz
LE
0.53 mH

Constructive Characteristics for 8Ω

Magnet
Ferrite
Voice Coil Winding
Copper
Voice Coil Former
Kapton
Cone Material
Paper
Surround Material
Integrated Paper
Dust Dome Material
Solid Paper
Basket Material
Pressed Sheet Steel
Surround Treatment
Yes

Electrical Characteristics for 8Ω

Nominal Impedance
8 Ω
Rated Power
25 W
Musical Power
50 W
Sensitivity@1W,1m
93.6 dB
C10R
10",
25 watts
Ohms

Colorful bell-like chime which transitions into a gritty response when presented with overdrive distortion.

Lows
Loose
Mids
Firm
Highs
Bright
Overdrive
Edgy/Crunchy
Guitarist Description
Colorful bell-like chime which transitions into a gritty response when presented with overdrive distortion.
Bassist Description
Round and bright
Specification Sheet
Product Dimensions
User Reviews

The new Jensen C10R was exactly what I wanted. I replaced the speaker in my 68 Princeton Reverb reissue and it's perfect.

OTH

I have a Jensen C10R in my Silverface 1970 Fender Princeton. It gives me a great sound clean or with overdrive. I highly recommend this speaker.

Sid

I purchased two Mod 12-50 's, one Mod 10-35 , and one C10R . I have them in a birch, slant back cab with the two 12" diagonal to one another and the two 10" diagonal to each other . I love the dynamics of this combination of speakers when playing through a tube amp head. I think it sounds better with the EL-84 head than with the 6V6 head.

Scott in Syracuse, NY

I purchased 4 Jensen C10Rs to replace JBLs that were in a 1970 Super reverb I recently acquired. It was way too heavy with the JBLs, so I sold the JBLs for mucho dinero and replaced with the Jensens. I also have a 1966 Super Reverb (my amp for 20 years!) with another brand replacement speakers for comparison. The C10Rs were perfect for the Super -good full tone, nice and chimey - my idea of a perfect Super Reverb tone! Give these serious consideration for Fender replacements - they are much nicer than the price would indicate.

Chuck P of Phildelphia, PA

I purchased a Jensen C10R. Wow, amazing! it made the replaced speaker sound like a toy. also the quality and workmanship was flawless...I finally have the tone I've been looking for. thank you.

Brian in West Palm Beach , FL

I've been playing guitar for 42 years, and have been playing in bands for 32 years. I bought several Jensen C10R speakers for two Fender Princeton Reverbs, one Fender Princeton, and one Fender Pro Jr. I have gigged with all of these amps. This speaker makes a 12 watt Fender Princeton Reverb loud enough to gig with. The C10R sounds much better than many of those high dollar boutique speakers I've tried. The C10R was very full sounding right out of the box. It took all of my amps to a different level. Clean or distorted - it sounds very even without a hint of harshness. Don't let the small magnet fool you - this speaker takes low guitar notes without a problem. The smaller magnet also makes the amp easier to transport.

Bill in Fresno, CA