I bought a pair of P10R's for a friend's Vibrolux as payment for a drill press I bought from him, I liked the sound so I bought a pair to go with my Fender Vibrosonic and my Peavey Delta Blues 210 and they sound great.
P10R
General Characteristics:
| Nominal Overall Diameter | 259 mm | 10 in |
| Nominal Voice Coil Diameter | 25 mm | 1 in |
| Magnet Weight | 200 g | 7.0 oz |
| Overall Weight | 3.15 lbs | |
| Flux Density | .96 T |
Thiele-Small Parameters:
| Voice Coil DC Resistance | RE | 6.70 Ω |
| Resonance Frequency | ƒS | 97.0 Hz |
| Mechanical Q Factor | QMS | 23.55 |
| Electrical Q Factor | QES | 1.60 |
| Total Q Factor | QTS | 1.50 |
| Mechanical Moving Mass | MMS | 13.1 g |
| Mechanical Compliance | CMS | 207 µm/N |
| Force Factor | BxL | 5.86 Wb/m |
| Equivalent Acoustic Volume | VAS | 31.6 lt. |
| Maximum Linear Displacement | XMAX | 0.8 mm |
| Reference Efficiency | nO | 1.7 % |
| Diaphragm Area | SD | 330.1 cm2 |
| Losses Electrical Resistance | RES | 102 Ω |
| Voice Coil Inductance @ 1kHz | LE | 0.54 mH |
Constructive Characteristics:
| Magnet | AlNiCo |
| Voice Coil Winding | Copper |
| Voice Coil Former | Kapton |
| Cone | Paper |
| Surround | Integrated Paper |
| Dust Dome | Felt |
| Basket | Pressed Sheet Steel |
Electrical Characteristics:
| Nominal Impedance | 8 Ω |
| Rated Power | 25 W |
| Musical Power | 50 W |
| Sensitivity@1W,1m | 95.0 dB |
P10R
10", 25 watts, 4Ω/8Ω/16Ω
The P10R has a rich, warm tone. In addition, it accentuates the higher frequencies in sparkling detail.
Sound Samples:
Clean Sound Sample
Overdriven Sound Sample
Files:
Product Dimensions:
Frequency Response Chart:
User Reviews
Click Here to submit your own review for Jensen Speakers!
Pierre in Eau Claire, WI
I built a deluxe reverb 2x10 combo and loaded a mix of the Jensen P10Q and the P10R together. All I can say is WOW...
That has got to be the best combination of alnico speakers I have ever heard in my life!
Randall
I am currently using two P10R alnico speakers in my 1971 silverface Fender Super Reverb. The Jensen speakers deliver the bright vintage tone I had been looking for. Thanks, Jensen Speakers
Geoffrey in Sacramento, CA
I am collecting parts to build a Fender Bassman clone and will use P10R's - they are my favorite speaker.
Brent
I am pleased to say that my choice of a Jensen P10R and a P12R Alnico speaker return the 44 year old Gibson GA-30RVT to its formal glory. The Jensen Vintage speakers give a very rich and warm sound, exactly what I was looking for, Thank You!
Lefty in New Hampshire